Manual Steel Pipe Deburring Machine

Cut steel tubes leave sharp inner and outer burrs that scratch sealing surfaces, contaminate hydraulic systems and cause premature fitting failure. Manual filing is slow, uneven and often damages tube walls.

XYOON Manual steel pipe deburring machine delivers fast, uniform inner/outer burr removal and end chamfering for seamless steel tubes. Fully hand-operated with no power needed, it works for both workshop fabrication and on-site piping jobs, ensuring clean tube ends for reliable bite-type fitting assembly.

 

Core Advantages

Ultra-portable: Lightweight handheld design, fits in tool bags and service truck kits, ideal for field repair jobs.

No power required: Fully manual operation, works anywhere without electricity or air supply.

One-step finishing: Removes inner and outer burrs and forms a 30°chamfer in one single rotation.

Replaceable HSS blade: Durable high-speed steel blade with long service life, low long-term maintenance cost.

Non-slip grip: Vertical ribbed body for secure handling even with oily work gloves.

Fast & consistent: 5–10 seconds per tube end, 10×faster than manual filing, uniform result every time.

 

Application scenario of Manual steel pipe deburring machine

On-site hydraulic pipeline installation

Construction machinery field repair

Mobile service trucks

Workshop maintenance

Hydraulic system retrofits

Farm equipment repair

 

Quality control

100% blade hardness and sharpness inspection before assembly.

Every unit tested on standard tube samples to verify deburring effect.

Body drop resistance and strength tested per batch.

Full traceability by unique production batch number.

 

Operation Guide

Standard steps

Hold the tube firmly with one hand.

Push the tool fully onto the tube end.

Rotate clockwise 3–5 turns with steady moderate pressure.

Remove the tool, wipe away metal chips, and inspect the tube end.

（Wear safety gloves. Do not apply excessive force; replace the blade when cutting performance declines）

 

Certification & Quality Assurance

Certifications Held:

ISO 9001:2015 – Quality management system certified

Quality Assurance:
100% blade hardness and sharpness inspection before assembly. Every unit tested on standard tube samples to verify deburring effect. Body drop resistance and strength tested per batch. Factory pass rate consistently above 99.5%. Full traceability by unique production batch number.

 

After-Sales Support & Warranty

 

12-month warranty against manufacturing defects.

Replacement blades available as consumable spare parts.

Technical support via email, phone, or video call for usage guidance and troubleshooting.

Batch traceability – production records archived for each batch.

Rapid resupply – standard stock available; bulk orders 15-20 working days.

Sample service – available upon request for customer verification.

 

Frequently Asked Questions

Q1: Can this deburring tool be used on stainless steel tubes?

A: Yes. The HSS blade is suitable for both carbon steel and stainless steel seamless tubes within the φ6-φ42mm range. For stainless steel, we recommend moderate pressure and consistent rotation speed.

Q2: How long does the blade last?

A: Under normal use on carbon steel tubes, a single HSS blade typically processes 500-800 tube ends. For stainless steel, blade life may be shorter. Replacement blades are available as spare parts.

Q3: Is the tool suitable for thin-wall tubes?

A: Yes. The tool is designed for standard seamless tubes including thin-wall types. Adjust pressure accordingly to avoid excessive material removal.

Q4: How to replace the blade?

A: Loosen the retaining screw, remove the old blade, insert the new blade, and tighten the screw. Always wear protective gloves during blade replacement.

Q5: Can Manual steel pipe deburring machine be used for in-situ maintenance on equipment?

A: Yes. Its lightweight, compact design and manual operation make it ideal for on-site use where power supply is unavailable, such as field repairs on construction machinery and mobile service trucks.